x

fgffdg

Tools & Equipment

Hiretech HT7 DISC FLOOR SANDER

The HT7-2 Hiretech Edger (Disc Floor Sander) will sand hard and soft wood floors, cork and composition floors and any solid wood surface that requires rapid sanding and levelling to a fine finish.

Category:

Features

  • N/A

Overview

The HT7-2 Hiretech Edger (Disc Floor Sander) will sand hard and
soft wood floors, cork and composition floors and any solid wood
surface that requires rapid sanding and levelling to a fine finish.

Ideal for confined areas such as closets and stair treads the HT7-2
will sand right up to the edge of a floor without damage to the base
(skirting) board. Completely self contained with a high efficiency
dust pick-up the HT7-2 is a high performance sander suitable for
professional and home owner use.

FEATURES

Standard Equipment
SAS (System of Active Stability) + OPS (Operator Presence Sensing System)
Sequential Seatbelt Interlock System (per AS2359) and Orange Seatbelt
Load backrest (V and FSV masts) [Height: 1220 mm], Easy-Down System (V Mast)
Alternator with IC Regulator and High Capacity Battery
7″ Cyclone Air Cleaner With Snorkel Air Intake
Large Assist Grip, Foot-Activated Parking Brake
Electronic Shift Control, Neutral Safety Switch and Anti-Restart Ignition Key Switch
Full Hydraulic Power Steering, Radiator Reservoir Tank
Overhead Guard with Rain Gutter, Hidden Tilt Cylinder, Tilt Cylinder Boots
Small Diameter Steering Wheel with Electric Horn, Tilting Steering Column
Engine Hood Damper (Lockable), Engine Hood Insulation, Floor Mat and Storage Area
Jacking Points, Drawbar Pin
Digital Hour Meter and Fuel Meter
Charge, Engine Water Temperature and Engine Oil Pressure Warning Lights
Brake, Remaining Coolant-Water and Clogged Air-Cleaner Warning Lights

Special Inclusions
LED strobe light; LP Gas Fittings (Without an LP Gas Bottle); Service Tasmania Road
Registration; I-Site data 12 months; Change tyres to Non Markers; Cascade Sideshifting
Fork Positioner, 100K-FPS-3A-1645, 115-1248(ITO)mm opening range; 4 x Blue Lights;
Rear-Pillar Assist Grip; Telematics&Poc + Keyless Ignit; Deluxe Pack
(C11D/K39A/L26B/D2; Body&Forks In One Color(Mast,B; TSDR#729911 – LED Rear
Lights; Lpg Fuel System (Australian Sp; Suspension Seat W/ Damper; Rear-View
Mirror,Right And Lef; Front Combination Lights; Rear Combination Lights; Led Head
Light; Back-Up Buzzer; 4-Valves,4 Hose A450; Body, Rims & Tynes in White colour
code 110051; Dual Wheels (Puncture Proof) 7.00-15/6.006.00S X 15Ir; Long Forkbar

SPECS

Nominal Capacity: 3,500kg at 500mm load centre

Rated Capacity: 1290kg @ 600mm load centre, mast vertical at full height. 2690kg up to 4300mm

Mast: 4.3m 3 Stage Container Mast

Lift Height: 6500mm

Collapsed Height: 3385mm

Forks: 1370mm

Engine: Toyota 4Y, 2237cc LPG/Petrol

Transmission: Powershift

Brakes: Hydraulic foot brake to drive wheels and mechanically activated dual action hand brake.

Tyres Front: 250-15-16PR heavy duty industrial

Tyres Rear: 6.50-10-12PR heavy duty industrial

Leave a Reply

Your email address will not be published. Required fields are marked *

Overview

The HT7-2 Hiretech Edger (Disc Floor Sander) will sand hard and
soft wood floors, cork and composition floors and any solid wood
surface that requires rapid sanding and levelling to a fine finish.

Ideal for confined areas such as closets and stair treads the HT7-2
will sand right up to the edge of a floor without damage to the base
(skirting) board. Completely self contained with a high efficiency
dust pick-up the HT7-2 is a high performance sander suitable for
professional and home owner use.

FEATURES

Standard Equipment
SAS (System of Active Stability) + OPS (Operator Presence Sensing System)
Sequential Seatbelt Interlock System (per AS2359) and Orange Seatbelt
Load backrest (V and FSV masts) [Height: 1220 mm], Easy-Down System (V Mast)
Alternator with IC Regulator and High Capacity Battery
7″ Cyclone Air Cleaner With Snorkel Air Intake
Large Assist Grip, Foot-Activated Parking Brake
Electronic Shift Control, Neutral Safety Switch and Anti-Restart Ignition Key Switch
Full Hydraulic Power Steering, Radiator Reservoir Tank
Overhead Guard with Rain Gutter, Hidden Tilt Cylinder, Tilt Cylinder Boots
Small Diameter Steering Wheel with Electric Horn, Tilting Steering Column
Engine Hood Damper (Lockable), Engine Hood Insulation, Floor Mat and Storage Area
Jacking Points, Drawbar Pin
Digital Hour Meter and Fuel Meter
Charge, Engine Water Temperature and Engine Oil Pressure Warning Lights
Brake, Remaining Coolant-Water and Clogged Air-Cleaner Warning Lights

Special Inclusions
LED strobe light; LP Gas Fittings (Without an LP Gas Bottle); Service Tasmania Road
Registration; I-Site data 12 months; Change tyres to Non Markers; Cascade Sideshifting
Fork Positioner, 100K-FPS-3A-1645, 115-1248(ITO)mm opening range; 4 x Blue Lights;
Rear-Pillar Assist Grip; Telematics&Poc + Keyless Ignit; Deluxe Pack
(C11D/K39A/L26B/D2; Body&Forks In One Color(Mast,B; TSDR#729911 – LED Rear
Lights; Lpg Fuel System (Australian Sp; Suspension Seat W/ Damper; Rear-View
Mirror,Right And Lef; Front Combination Lights; Rear Combination Lights; Led Head
Light; Back-Up Buzzer; 4-Valves,4 Hose A450; Body, Rims & Tynes in White colour
code 110051; Dual Wheels (Puncture Proof) 7.00-15/6.006.00S X 15Ir; Long Forkbar

SPECS

Nominal Capacity: 3,500kg at 500mm load centre

Rated Capacity: 1290kg @ 600mm load centre, mast vertical at full height. 2690kg up to 4300mm

Mast: 4.3m 3 Stage Container Mast

Lift Height: 6500mm

Collapsed Height: 3385mm

Forks: 1370mm

Engine: Toyota 4Y, 2237cc LPG/Petrol

Transmission: Powershift

Brakes: Hydraulic foot brake to drive wheels and mechanically activated dual action hand brake.

Tyres Front: 250-15-16PR heavy duty industrial

Tyres Rear: 6.50-10-12PR heavy duty industrial

FEATURED EQUIPMENT

Open 24 / 7 / 365

GET IN TOUCH.
WE’LL HELP YOU FIND A SOLUTION.

    1300 218 473


    Call now to talk to us about the finding best solutions for you.